August 9, 2018/by Edward Ring
Californians have approved two water bonds in recent years, with another facing voters this November. In 2014 voters approved Prop. 1, allocating $7.1 billion for water projects. This June, voters approved Prop. 68, allocating another $4.0 billion for water projects. And this November, voters are being asked to approve Prop. 3, allocating another $8.9 billion for water projects. This totals $20.0 billion in just four years. But how much of that $20.0 billion is to be invested in water infrastructure and water storage?
Summaries of how these funds are spent, or will be spent, can be found on Ballotpedia for Prop. 1, 2014, Prop. 68, 2018 (June), and the upcoming Prop. 3, 2018 (November). Reviewing the line items for each of these bonds and compiling them into five categories is necessarily subjective. There are several line items that don’t fit into a single category. But overall, the following chart offers a useful view of where the money has gone, or where it is proposed to go. To review the assumptions made, the Excel worksheet used to compile this data can be downloaded here. The five categories are (1) Habitat Restoration, (2) Water Infrastructure, (3) Park Maintenance, (4) Reservoir Storage, and (5) Other Supply/Storage.
The Case for More Water Storage
It isn’t hard to endorse the projects funded by these water bonds. If you review the line items, there is a case for all of them. This November, voters will have a chance to approve $200 million to restore Salton Sea habitat, a sum that joins the $200 million of Salton Sea habitat restoration approved by voters in June 2018 in Prop. 68. This November, voters will have a chance to approve $150 million to turn the Los Angeles River back into a river, instead of the concrete culvert that was completely paved over between 1938 and 1960.
Who would be against projects like this? But Californians are heavy water consumers in a relatively arid state. Habitat restoration and park maintenance spending must be balanced against spending for water infrastructure. And conservation mandates must be balanced with investments in infrastructure that increase the overall supply of water. Here’s how Californians are currently managing their water:
Total Water Supply and Usage in California
As can be seen on the above table, residential water consumption represents less than 6% of California’s total water diversions. Indoor water consumption, only about half of that. Yet conservation measures imposed on California’s households are somehow expected to enable more water to be returned to the environment. Even with farmers, where conservation measures have the potential to yield far more savings, putting more irrigated land into agricultural production easily offsets those savings.
Not only does conservation fail to return sufficient water to the environment for habitat maintenance, but there is a downside in terms of system resiliency. During the last drought, when households were asked to reduce water consumption by 20%, it wasn’t an impossible request to fulfill. But as these reductions in consumption become permanent, far less flexibility remains.
California’s climate has always endured periods of drought, sometimes lasting several years. Meanwhile, the population continues to increase, farming production continues to rise, and we have higher expectations than ever in terms of maintaining and restoring healthy ecosystems throughout the state. We cannot merely conserve water. We need to also increase supplies of water. Ideally, by several million acre feet per year.
How Much California Water Bond Money is for Surface Storage?
Prop. 1, approved by voters in 2014, was called the “Water Quality, Supply, and Infrastructure Improvement Act of 2014.” It was marketed as necessary to increase water storage in order to protect Californians against droughts, and was overwhelmingly approved by over 67% of voters. But only about one-third of the money actually went to water storage, and it took nearly four years before any of those funds were allocated to specific storage projects. It was only this month, July 2018, that the California Water Commission awarded grants under their “Water Storage Investment Program.”
A review of these grants indicates that only two of them allocate funds to construct large new reservoirs. The proposed Temperance Flat Reservoir will add 1.2 million acre feet of storage. Situated south of the delta, it will be constructed on the San Joaquin River above a much smaller existing dam. It is estimated to cost $2.7 billion, and the California Water Commission awarded $171 million, only about 6% of the total required funds.
The proposed Sites Reservoir is situated north of the delta, west of the Sacramento river. It is an offstream reservoir, meaning that it will be filled using excess storm runoff pumped out of the Sacramento river during the rainy season. It is designed to store up to 1.8 million acre feet of water and is estimated to cost $5.2 billion to construct. The California Water Commission awarded $816 million, a large sum, but only about 16% of the total required funds.
Two other surface storage projects were approved, expansion of the existing Los Vaqueros and Pacheco reservoirs. Both of these reservoirs serve water consumers in the San Francisco Bay Area, both are supplied water via the California Aqueduct, and both expansion projects are estimated to cost not quite a billion dollars – $795 million for Los Vaqueros and $969 million for Pacheco. The California water commission awarded Los Vaqueros $459 million, and they awarded Pacheco $484 million.
When you consider surface storage, the total capacity of a reservoir is a critical variable, but in many ways more significant is the annual “yield.” This is the amount of water that on average, over decades, the reservoir is planned to deliver to water consumers in normal years. While the Los Vaqueros and Pacheco reservoir expansions combined will add roughly 250,000 acre feet of storage capacity, most of this added capacity is to save for drought years. Los Vaqueros may actually yield up to 35,000 acre feet per year in normal years; Pacheco may yield around 20,000 acre feet per year in normal years.
With respect to annual yields, the case for the much larger Sites and Temperance Flat reservoirs becomes more compelling. The Temperance Flat Reservoir is projected to yield 250,000 acre feet of water in normal years, the Sites Reservoir, a massive 500,000 acre feet. To put this in perspective, 750,000 acre feet represents 20% of ALL residential water consumption in California, or, put another way, each year these reservoirs will yield a quantity of water equivalent to 100% of the reductions achieved via conservation measures imposed on California’s residents during the drought. But will they ever get built?
According to spokespersons for the Sites and Temperance Flats projects, some federal funding is expected, but most of the funding will be from agricultural and urban water districts who will purchase the water (as well as the right to store surplus water in the new reservoir) as soon as its available. The projects still require congressional approval, and then will face a multi-year gauntlet of permit processes and the inevitable litigation. If all goes well, however, both of them could be built and delivering water by 2030.
How Else is Water Bond Money Being Used to Increase Water Supply?
All three of the recent water bonds had some money allocated to invest in water supply. Prop. 1 in 2014, in addition to investing $1.9 billion in surface water storage, allocated $1.4 billion to other projects intended to increase water supply. The projects they approved are either intended to store water in underground aquifers, or fund advanced water treatment and recycling technologies which have the practical effect of increasing water supply. While it isn’t clear from these groundwater storage proposals how much water they would then release in normal years, it appears that cumulatively the projects intend to eventually store as much as 1.0 million acre feet in underground aquifers.
At a combined cost total cost of under one billion, the aquifer storage projects just approved appear to be more cost effective than surface storage. It is also a critical priority to recharge California’s aquifers which have been drawn down significantly over the past several years, especially during the recent drought.
Prop. 68, the “Parks, Environment, and Water Bond” passed earlier this year, while mostly allocating its $4.0 billion to other projects, did allocate $290 million to “groundwater investments, including groundwater recharge with surface water, stormwater, and recycled water and projects to prevent contamination of groundwater sources of drinking water.”
The upcoming Prop. 3, the $8.9 billion “Water Infrastructure and Watershed Conservation Bond Initiative” that will appear on the November 2018 ballot, invests another $350 million to maintain existing, mostly small urban reservoirs, along with $200 million to complete repairs on the Oroville Dam. Prop. 3 also includes $1.6 billion to otherwise increase water storage and supply, including $400 million for wastewater recycling and $400 million for desalination of brackish groundwater.
It is important to emphasize again that all of the funds allocated in these three water bonds are paying for what are arguably worthwhile, if not critical projects. $6.3 billion for habitat restoration, $6.2 billion for water infrastructure, $1.6 billion to maintain our parks. But despite the worth of these other projects, Californians urgently need to increase their annual supply of water to ensure ecosystem health, irrigate crops, and supply urban consumers. And to address that need, out of $20 billion in water bonds passed or proposed between 2014 and this November, only $5.8 billion, less than one-third, is being used to increase water supplies.
What Other Ways Could Water Bond Money Be Used to Increase Water Supply?
Clearly the most important region to increase water supply is Southern California. Two thirds of all Californians live south of the Sacramento River Delta, while most of the rain falls on in Northern California. One way to increase California’s supply of fresh water is to build desalination plants. This technology is already in widespread use throughout the world, deployed at massive scale in Singapore, Israel, Saudi Arabia, Australia, and elsewhere. One of the newest plants worldwide, the Sorek plant in Israel, cost $500 million to build and desalinates 120,000 acre feet of water per year.
Theoretically – because capital costs in California are far higher than in most of the rest of the developed world – desalination offers a cost-effective solution to water scarcity. Uniquely, desalination creates new water, not dependent on rainfall, not requiring storage for drought years, not requiring redirecting of water from other uses. Imagine if Californians invested in desalination plants along the entire Southern California Coast. Eight desalination plants the same size as the Sorek plant would cost $4.0 billion to build if constructed for the same cost as the one in Israel cost. They could desalinate 1.0 million acre feet per year.
The energy costs for desalination have come down in recent years. Modern plants, using 16″ diameter reverse osmosis filtration tubes, only require 5 kWh per cubic meter of desalinated water. This means it would only require a 700 megawatt power plant to provide sufficient energy to desalinate 1.0 million acre feet per year. Currently it takes about 300 megawatts for the Edmonston Pumping Plant to lift one million acre feet of water from the California aqueduct 1,926 ft (587 m) over the Tehachapi Mountains into the Los Angeles basin. And that’s just the biggest lift, the California aqueduct uses several pumping stations to transport water from north to south. So the net energy costs to desalinate water on location vs transporting it hundreds of miles are not that far apart.
The entire net urban water consumption on California’s “South Coast” (this includes all of Los Angeles and Orange County – over 13 million people) is 3.5 million acre feet. It is conceivable that desalination plants producing 1.0 million acre feet of new water each year, combined with comprehensive sewage reuse and natural runoff harvesting could render the most populous region in California water independent.
Why is Infrastructure so Expensive in California?
The Carlsbad desalination plant in San Diego cost $925 million to build, and it has a capacity of 56,000 acre feet per year. That is a capital cost per acre foot of annual yield of $16,500. How is it that the Sorek desalination plant in Israel cost $500 million to build and has a capacity of 120,000 acre feet per year – a capital cost per acre foot of annual yield of only $4,100? Why did it cost four times as much to build the Carlsbad desalination plant?
This is the prevailing question when evaluating infrastructure investment in California. Why does everything cost so much more? The Sites reservoir is projected to cost $5.2 billion. An off-stream reservoir of equal size, the San Luis Reservoir, was constructed in California in the 1960s at a total cost, in 2018 dollars, of $2.3 billion. That all-in cost includes not just the dam, but also includes pumping stations, the forebay, the intertie to the California Aqueduct, and conveyances to get some of the water over the Diablo Range into the Santa Clara Valley. All of these costs (in today’s dollars) for the San Luis Reservoir, compared to the proposed Sites Reservoir, cost less than half as much. Why?
It’s easy to become enthusiastic about virtually any project that will increase our resiliency to disasters and droughts, improve our quality of life, steward our ecosystems, and hopefully create abundance of vital resources such as water. But when considering the need for these various projects, it is equally important to ask why they cost so much more here in California, and to explore ways to bring costs back down to national and international norms. We could do so much more with what we have to spend.
Edward Ring co-founded the California Policy Center and served as its first president.